E-Sky
has created a newly designed 2.4GHz
frequency band,"2.4GHz" RC system
with advanced Spread Spectrum
Technology and digital FSK(frequency
shift key)Coding Technology. This
offers many advantages compared to
traditional 72 MHz transmitters.
Traditional remote control
distance for helis and park flyers
is about 250 meters,requiring a
transmitter with 750mW transmitting
power consumption. But 2.4GHz
transmitter just needs 14mW power to
perform at the same level.
2.4GHz uses binding or FSK,to
prevent signal interference when
flying in large groups.
2.4GHz remote control systems
employ an integrated frequency
synthesis and FSK(frequency shift
key) technology,which automatically
programs and sets the working
frequency via the microprocessor.
Flyers can enjoy a glitch free
flight without changing crystals.
The signal between the
transmitter and receiver use a
redundant data stream to ensure
accuracy.
The Radio system offers quick
response and reduced servo chatter.
2.4Ghz RC System frequency wave
range is 1/4 of the usual used
frequency wave range. The
transmitter antenna is just 14.5cm
in length and the receiver antenna
is greatly reduced over 72MHz.
Normal binding operation is simple:
1. Power on the transmitter, the
indicator on 2.4G transmitter will
blink for 3 seconds. This indicates
that transmitter is sending code
binding information.
2. After 3 seconds, the blinking
2.4G transmitter indicator becomes
solid.
3. Connect the receiver or 4in 1 mix
controller, observe the receiver or
4 in 1 mix controller. 2.4G
transmitter indicator blinks two
times and turns solid, which
indicates that the reception of the
channel data is successful and you
are ready to fly.
|
|
|
