|
|
|
Here's what our customers say about
us:
-
Tumble Buddy is "Way Cool and it is still in one piece! Its
responsive controls are a challenge for 62-year old and
relatively novice (perhaps 100 flights with 3-ch) thumbs.
But it went where I pointed it -- did it ever -- and will
fly slowly enough that I avoided a crash. My tree-lined
yard is roughly 150 by 60 feet, which makes its flight
characteristics essential. Tumble Buddy was exactly what I
wanted. I think I will order a spare just in case. Thanks
for giving me your time, advice, and a great product."
Mike - Elko, NV
-
"Took
the JINX out for it’s first flights last week. I was the hit
of the field, nobody could believe the roll rate. This is a
great design a very fun bird."
Gary -
Rancho Cucamonga, CA
- "I
purchased the Slick as my first-ever 3D plane and it was
definitely
the right decision! The plane is very easy to build and is
proving to be
an extremely fun and satisfying plane to fly. I feel like my
3D flying
skills improve with each flight. Plus, since it's so light,
it is very
tough and takes the inevitable learning crashes very well.
Mission
accomplished!"
Steve -
Santa Barbara, CA
-
"I had my
first indoor flying session with the Slick last night
and I was VERY impressed. The all up weight with a 340 mAh 2S pack was 5.2 ozs. It flies very light - slower
speeds, tighter turning radius better loops and hovering
was as close to effortless as you can get. The power
with the lens motor was excellent."
Brian - Victoria, B.C.
- "I am
about 75% done with the N3DII (I have to borrow the
kitchen to build and can only squeeze in short bursts).
I must say the kit is outstanding. The quality of the
balsa is exceptional. It's hard to quit working when
the progress goes so quickly and the actual plane
appears before your eyes."
Don - Mesa, AZ
-
“Finally
got my Nemesis finished and flying. With the Nippy
0808/98 using the 10x3.8 prop it flies great! Eerily
quiet and I can't believe the performance of the plane.
I am really impressed! Still can't hover very well, but
I'll eventually get there. You make it look too easy.”
Steve - Helotes, TX
-
“All who have flown our Nem ll have liked it
and it has taken some hard hits but only small damage, so
you have got the design right.”
Don – Orlando, FL
-
“This model does it all. It is such a nice
break-away from the typical flimsy depron foam models. Flies
much more solidly too. This is the model that will reside
permanently in my work van for those lunchtime sorties!”
Jeff – Salem, OR
-
“Just wanted to share my joy on flying the
new Nemesis II. What a great build and fun plane to fly! She
framed up in a little less than 2 hrs.”
“Grizzowner” – RC Groups
-
“OK, this is a MUST HAVE for any park flyer
pilot! The finest laser-cut kit I ever laid hands on (I am
actually afraid to say I "built" it, as it almost goes
together by itself) !!”
Arthur – Alpharetta, GA
-
“This is the easiest kit I have ever built.”
Rick – Patchogue, NY
-
“I sent Randy a check on 12/26 and the kit
arrived yesterday 1/3 (you can't beat that for service --
both Randy's and the post office).”
Jim – Wexford, PA
|
| |
|
|
